ieGeek Wireless Video Doorbell Quick Start Guide

Box contents, doorbell and chime layout, charging, app setup, Wi-Fi pairing, chime pairing, installation and troubleshooting for the ieGeek Wireless Video Doorbell with the CloudEdge app.

This quick start guide covers the ieGeek Wireless Video Doorbell and its wireless indoor chime, set up and controlled through the CloudEdge app (also available as the "ieGeek Cam" app).

Need more help? See the Doorbell FAQs. You can also contact ieGeek via the official mailbox [email protected].

ieGeek Wireless Video Doorbell with wireless indoor chime

1. What's in the Box?

Please consult below checklist for all the components.

Box contents: Video Doorbell with bracket, Indoor Chime, Charging Cable, Screws & Tools, User Guide, Double-sided Tape

Video Doorbell (with Bracket)
Indoor Chime
Charging Cable
Screws & Tools
User Guide
Double-sided Tape

2. Meet the Doorbell

Front and side views of the doorbell with numbered call-outs

#	Part	#	Part
1	Lens	2	PIR Motion Sensor
3	Microphone	4	Doorbell Button (Power Button)
5	LED Indicator	6	Speaker
7	Unlock hole	8	Unlock Pin
9	Reset Button	10	Charging Port
11	Charging Indicator	12	Micro-SD Card Slot
13	Doorbell Bracket

The doorbell has a Li-ion battery built-in.

*When you receive the product, the doorbell and bracket are integrated.

3. Meet the Chime

Front view and battery compartment of the wireless chime with numbered call-outs

#	Part	#	Part
1	LED Indicator	2	Setting
3	Volume Control	4	Select Ringtone
5	AAA Batteries

Setting. Click to enter/quit pairing mode; press & hold for 5 seconds to restore factory defaults.
Volume control button. Click to control volume: level 1: 110 dB; level 2: 100 dB; level 3: 90 dB; level 4: 80 dB.
Ringtone selection. Click to change ringtone (4 ringtones available).

4. Charge Your Doorbell

LED Status	Indication
Solid red	Battery charging
Solid blue	Fully charged

Compatible charger (not included): USB compatible mobile phone charger (DC 5V 1A~2A).

Connecting the charging cable to the doorbell charging port

Battery Life: 1-2 months

Under laboratory environments, the wireless doorbell works 2 months with 20 triggers a day.

Tips: Battery life depends on temperature, PIR trigger frequency and battery aging factors.

5. App Download

Search 'ieGeek Cam' in the APP Store or scan the QR codes in the manual to download the APP. (Also supports the 'CloudEdge' APP.)

Multi-Device Connection

You can add multiple devices on the ieGeek Cam APP for easy management.

Device Sharing

You can share the camera screen with other users by scanning QR code or entering other accounts.

Path: Settings - Device sharing - Follow the APP guidance.

Notes

The same account does not support simultaneous login on different devices.
Only the main account can adjust the camera settings, and the shared account cannot modify the settings.

6. Set Up Doorbell

6.1 Install Micro SD Card (Not included)

Use the included unlocking pin tool to insert into the small hole on the bottom.

Remove the doorbell from bracket.

Insert the Micro SD card into the card slot on the left side of the doorbell.

Three-step diagram showing how to release the doorbell and insert the Micro SD card

Notes for Micro SD Card

Please insert Micro SD Card before powering on, otherwise the Micro SD card can not be detected.
ieGeek doorbell supports Micro SD card up to 128GB.
Requirement Condition: Class 10 reading and writing speed and FAT32 file format (formatted before use).

6.2 Connect the Doorbell to Wifi

Press the doorbell button to activate it, and you will see the LED indicator flashes red (once per second). If not, press and hold reset button for 5 seconds to restore factory defaults.

Method 1: Bluetooth Set Up

On the Homepage, tap "Add" or "+" in the upper right corner, tap "Add Device".

If the Bluetooth of cellphone doesn't turn on, the app will show a pop-up, please allow it to turn on Bluetooth.

After Bluetooth turns on, the app will automatically search for devices that are on and not bound. Select the device you want to connect in the search list.

Method 2: Scan the QR Code

On the Homepage, tap "Add" or "+" in the upper right corner, tap "Add Device".

Choose Smart Doorbell (2.4G Wifi) and follow the in-app instruction.

Tips:

Please operate settings near your Wi-Fi router.
Make sure your phone is connected to 2.4GHz Wi-Fi.
Make sure the doorbell is turned on, and the LED indicator is flashing red. If not, press and hold RESET for 5 seconds.
Make sure the Wi-Fi signal is good, and the Wi-Fi password is correct.

LED Status	Indication
Solid red	Device is abnormal
Flash red (once/sec)	Ready for Wi-Fi configuration
Flash red (twice/sec)	Connecting to Wi-Fi
Solid blue	Device is online
Flash blue (once/sec)	Live-viewing doorbell cam
Flash blue (twice/sec)	Firmware upgrading

7. Pair with Your Indoor Chime

When you receive the product, chime and the doorbell are connected by default. If you find the chime is not connected to the doorbell, you can connect it manually as follows:

Click the SETTING button on the chime, and the chime will be in pairing mode for 20 seconds, with its red LED flashing.

Chime with SETTING button and LED indicator labelled

Press the doorbell button to send a pairing signal, and your chime will sound to react, together with its blue LED flashing. Chime pairing succeeds.

Pressing the doorbell button so the chime rings and its indicator flashes blue

8. Install Your Doorbell

Select a location

It is suggested to mount the doorbell at least 4 feet (120 cm) above the ground for optimal angle of view and best motion detection performance.

Diagram showing the doorbell mounted 120 cm above the ground

Mount your doorbell

Release the rear mount using the unlock pin.

Releasing the rear mount with the unlock pin in the unlock hole

Mark the screw holes with the doorbell mount.

Mount the rear mount to your wall with screws and tools.

Marking screw holes and fixing the rear mount to the wall with screws and anchors

Adhesive tapes are optional to mount the doorbell on flat surfaces.

Attach the doorbell to its rear mount, and push the doorbell to lock up.

Applying adhesive tape and attaching the doorbell to its rear mount

All set! Press the doorbell button to run a test.

If you encounter any questions, please contact us via email: [email protected].

Q1: Is the video doorbell powered by battery? A1: Yes, there is a Li-ion battery built-in. Thanks to the low power consumption technology, a full charge lasts for about 2 months in our lab test environment (Lab test condition: 10 events per day, 15 seconds video recording per event). When the temperature is too low, the power consumption rate will increase.

Q2: Does it support legacy hardwire power source? A2: No, it doesn't.

Q3: Does the doorbell support 5GHZ WiFi? A3: No, it only supports 2.4GHZ WiFi.

Q4: How many wireless chimes can be added to the doorbell? A4: You can add several wireless chimes to work with your video doorbell.

Q5: Does it support customized Motion Detection Zones? A5: Yes it does. You can customize the detection zone in the doorbell settings.

Q6: Does the doorbell support cloud storage? A6: Your doorbell supports local video storage by Micro SD card. And you can also activate free cloud storage service in the App. Free cloud storage supports 6s video recording and the storage time is seven days.

Set path: Setting --- Cloud Storage Service --- Basic Cloud Storage --- Scroll to the bottom of the page --- Tap to on.

Q7: How to install Micro SD card? A7: Use the included pin to insert into the small hole at the bottom of the doorbell to remove the doorbell from the bracket. The SD card slot is on the left side. (The doorbell and the bracket are integrated when you receive it.)